-
Arduino Mega 2560 회로정리아두이노 2021. 3. 31. 14:19
박선우에게 도움이 될까해서 아두이노를 공부하면서 글을 남긴다.
아두이노를 먼저 사용해보고
아두이노와 Verilog/VHDL 의 차이점 위주로 글을 작성할 예정이다.
Arduino Mega 2560 Schematic
www.arduino.cc/en/uploads/Main/arduino-mega2560-schematic.pdf
Power 5V = DC power jack / USB port (USB 2.0 = 500 mA, USB 3.0 = 900 mA 맞나??)
Power 3.3V = LP2985-33 (Output Current = 150mA)
Main Clock = 16 Mhz
ATMEGA640/1280/1281/2560/2561 Datasheet
VCC - digital supply voltage (1.8V ~ 5.5V 가능)
Supply Voltage Maximum Frequency 1.8 V 4 Mhz 2.7 V 8 Mhz 4.5 V 16 Mhz * Safe Operating Area 5.5 V 16 Mhz * Safe Operating Area AVCC - AVCC is supply voltage pin for Port F and A/D converter. It should be externally connected to VCC, even if the ADC is not used, If the ADC is used, ti should be connected to VCC through a low-pass filter.
schematic 상에서 VCC 와 AVCC 는 filter 없이 연결되어 있다.
'아두이노' 카테고리의 다른 글
Touch Sense Key Matrix (HW-136 , 8229BSF) (0) 2021.04.06 Arduino digitalRead() 반응속도 (0) 2021.04.01 Arduino digitalWrite() 반응속도 (0) 2021.03.31